STORMTROOPER E-11 PIPE BLASTER BASE DETAILING KIT

20 PIECE STORMTROOPER PVC STERLING BASE  KIT

AS DETAILED IN THE PICTURE ABOVE THIS IS A COMPLETE PIPE DETAILING KIT WHICH WILL GIVE YOU A FIRST CLASS STERLING REPLICA WITH WHICH TO COMPLETE YOUR E-11 YOU WILL ONLY NEED TO ADD THE EXTRA DETAILING LIKE SCOPE AND RAIL AND GREEBLIES FROM YOUR PREFERED VERSION

. IF YOUR SCRATCH BUILDING YOUR OWN STORMTROOPER BLASTER  OR ARE USING THE PVC BLASTER PLANS AVAILABLE ONLINE THEN THESE PARTS WILL SAVE  YOU TIME AND GIVE YOU A VERY ACCURATE BASE FOR WHICH EVER VERSION OF THE E-11 YOU PLAN TO BUILD 

THE PARTS ARE FIRST GENERATION CASTS FROM A GENUINE STERLING SUB AND HAVE BEEN MODIFIED SLIGHTLY TO FIT AROUND THE STANDARD 40 mm WASTE PIPE AVAILABE FROM YOUR LOCAL HARDWARE STORE. THE PARTS THAT SIT AGAINST THE BLASTER ALREADY HAVE THE CORRECT 40mm RADIUS CAST IN SO THEY SIT FLUSH TO THE BODY WITHOUT THE NEED FOR MAJOR SURGERY OR FILLING

OK ABIT MORE DETAIL THAT THE PHOTO'S DO NOT SHOW, THE REAR END CAP IS HOLLOW AND THE FRONT TIP IS A PLUG SO YOU ONLY NEED TO ENSURE THE FRONT FOF THE BLASTER IS TRUE AND IF YOUR BUYING A NEW PIECE OF PIPE THEN THE MANUFACTURER WILL HAVE DONE THE FRONT END FOR YOU BELIEVE ME THIS WILL SAVE ALOT OF TIME AND HEADACHES 

ANOTHER BONUS IS YOU DONT HAVE TO GLUE THE REAR END CAP IN PLACE IF YOU DONT WANT TO. YOU NEED TO ADD 1/4 INCH  EXTRA PIPE TO THE PLANS ON THE REAR END IN ANY CASE SO IF YOU WANT YOU CAN FIT BATTERIES AND ELECTRONICS ETC  I HAVE EVEN INCLUDED THE EJECTOR PORT WHICH HAS BEEN MODIFIED SO YOU CAN STILL SCREW AND GLUE THE MAG AND GRIP AND STILL SLIDE IT DOWN THE BARREL INTO PLACE  EVEN IF THE SCREW'S PROTUDE INSIDE THE BARREL ALSO INCLUDED IS THE COCKING LEVER

DUE TO A COUPLE OF REQUESTS I'VE NOW ALSO ADDED A TRIGGER GUARD (NOT PICTURED) TO THE KIT AS STANDARD WHICH IS A CAST FROM THE REAL TRIGGER GUARD AND REMOULDED TO JUST SLOT AND GLUE IN PLACE ON THE GRIP SO NOW ITS A WHOPPING 20 PART KIT

YOU GET EVERYTHING DETAILED BELOW THAT YOU NEED TO BUILD YOUR OWN STERLING SUB APART FROM THE 40MM PVC PIPE THAT YOU NEED TO MAKE THE MAIN BODY AS I MENTIONED THIS IS READILY AVAILABLE FROM YOUR LOCAL HARDWARE STORE  AND THEN YOUR CHOICE OF SCOPE / RAIL AND GREEBLIES

YOU WILL ALSO NEED THE AVAILABLE PLANS FOR THE MAIN BODY WHICH I CANNOT SUPPLY SO PLEASE DONT ASK BUT THEY ARE READILY AVAILABLE FOR YOUR BUILD UP AND A GOOGLE SEARCH WILL TAKE YOU TO THE RIGHT PLACE

THE PICTURES BELOW ARE OF A SIMPLE NO NONSENSE BUILD UP WITH GLUE AND SCREWS  BUT  NO FILLER NOT EVEN ON THE UNDERSTOCK JOIN WHICH IS RECOMMENDED FOR THE BEST FINISH, I JUST WANTED TO SHOW YOU HOW GOOD JUST A REALLY BASIC BUILD UP WOULD LOOK SIMPLY GLUED AND SPRAYED BLACK YOU REALLY DONT NEED TO PAY £100+ FOR A FINISHED ACCURATE BLASTER  BUILD YOUR OWN ITS ALOT MORE FUN

THIS KIT CONTAINS

1 hollow rear end cap

2. front barrel end plug

3. folding stock barrel mount

4 end cap lock

5. selector switch

6. rear sight

7. cocking lever

8 main grip

9. ejector guard

10. trigger

11 magazine retaining nut

12. cut down mag section

13. main magazine receiver body

14. forward vent guard

15. bayonet lug (yes really even this is included)

16. forward sight

17. ejector port

18. understock rear section

19. understock forward section

20. Trigger guard

REMEMBER

YOU WILL NEED TO SUPPLY YOUR OWN PLANS AND PVC PIPE

THESE PARTS ARE CAST IN HIGH GRADE 2 PART POLYURETHANE RESIN